wholesale jerseys

XTuner Blog

/XTuner Blog/

Xtuner CVD 16 Client Software First Version Released

January 27th, 2018|Categories: XTuner X500|

Xtuner CVD 16 Client Software First Version Released   It is a great news that the long-anticipated Xtuner CVD 16 client software First version has released.   Xtuner CVD is truck OBD product. At first, it only has three types of products, but now it has released the third type -- Xtuner CVD 16.   With U-shape design to fit the hand posture and increase comfort, [...]

Xtuner T1 Updated again! Xtuner CVD update information

January 10th, 2018|Categories: XTuner T1|

We releasd the new version of Xtuner T1 recently. The detail infomation as below: XTUNER T1 update information: FUSO upgrade to V12.4 1.Add National-V Engine system, National-III/National-IV BOSCH EDC7 C4-6 system. 2.Add special function: Engine oil learning, Fuel injection valve (reset), Pressure limiting valve in oil rail, Oil rail pressure sensor, Air fuel ratio control tester, Air mass flow / intake temperature sensor, Turbocharger (reset), Egr, Starter motor, The learning value of the AdBlue metering device for the reset unit, The learning value of the SCR catalytic converter for the reset component, Diesel particulate filter, Differential pressure sensor for diesel particulate filter, Cancellation of engine start limit, Reset DPF regenerated data. ALLISON upgrade to V12.3 1.Add 1000/2000 product series (fourth generation), 3000/4000 product series (fourth generation). Xtuner T1 details Features The vehicle model and engine type can be auto detected. It can display 99% of Heavy-Duty fault codes with detailed OEM level component and trailer descriptions. Support OE Level Fault Code [...]

Xtuner CVD 6/9 Update! Xtuner CVD OBD Updated!

January 10th, 2018|Categories: Xtuner-cvd-9|

We released new version of Xtuner CVD 6/9 recently. CVD-6/CVD-9 update information:   DISPLAY UI upgrade to V4.6 Optimize UI display Add retrive password function Improve diagnostic capabilities and communication layer stability New model software update reminder. Optimization of diagnostic data flow interface interaction. New freeze data stream refresh function. Add history reminder for diagnostic menu [...]

Xtuner E3 Update !

January 10th, 2018|Categories: XTuner E3|

We released new version of Xtuner E3 recently. The detail information as below: Xtuner E3 update information: INFINITI upgrade to  18.2 1.Added 39 vehicle models covered up to 2017. 2.Added hundreds of special functions. CHRYSLER upgrade to 14.0 1.Added 55 vehicle models covered up to 2017. 2.Added ECU Info. and Active Test. JEEP upgrade to 14.0 1.Added 55 vehicle models covered up to 2017. 2.Added ECU Info. and Active Test. Besides, I still attached the Xtuner E3 other detail information, as below: Features Extremely easy-to-use with touch-screen operation and intuitive operation in the windows. Support online DTC query, Oline dictionary, data [...]

Xtuner E3 Update Information Xtuner E3 Update to V9.2

January 4th, 2018|Categories: XTuner E3|

  The detail information as follows: NISSAN upgrade to V18.2 1.Added data of all models, Covered up to 2017   VPECKER E1 India Update information:   MAHINDRA upgrade to V15.0 1.Added DataList for most of systems. 2.Added Active Test of Engine Systems of all vehicle model. 3.Added Special Functions: Battery Reset EKP And Counter Reset EOL [...]

Xtuner T1 update information

November 27th, 2017|Categories: XTuner X500|

Xtuner T1 updated information as follows: HINO_12.7 1.Add auto scan UD_V12.3 1.Update the software(Basic Function). If you still don't know about Xtuner T1, Please read this blog, I will tell you one more time. Xtuner-T1 Function: Read ECU Info, Read DTCs, Erase DTCs, Clear learning value, Data Stream, Actuations, Read freeze frame data, Read/Write VIN, Basic Reset, Control unit adaptations, Air [...]

New product Xtuner U3 will release soon.

November 14th, 2017|Categories: XTuner X500|

We will release the new product Xtuner U3 soon. This is an singe brand vehicles diagnostic tool. It would be your best partner for your cars. Very suit for cars owner. Know your cars’ healthy everywhere and anytime. Let me tell you the first one product: Xtuner U3- HYUNDAI This is the function instruction: Xtuner U3 [...]

How to send feedback on software online? How to send technical questions to us?

October 10th, 2017|Categories: Technical Support|

How to send feedback on software online? when you can't log-in your device. when you can't activate. when you can't register. when your device appears: invalid serial number or password, please reenter or check your network. ... When you suffer those problems First Please check your device version, make sure your device version is the latest [...]

The update and log-in questions of Xtuner E3 and vpecker

September 27th, 2017|Categories: XTuner E3|Tags: |

The questions of Vpecker and Xtuner E3 you may meet recently. Recently, We received many letters about vpecker and Xtuner E3 as follows, I will give everyone an answer after those questions.If you suffer the same problems, please check the answer. The questions as follows: 1, I buy a Vpecker unit and I have a problem when I try [...]

Xtuner E3 Update to Xtuner E3+(Xtuner E3 PRO) Released!!!

September 23rd, 2017|Categories: XTuner E3|Tags: |

It is a great news that Xtuner E3+(Xtuner E3 PRO) Released!!! The Xtuner E3 updated to Xtuner E3+ (Xtuner E3 PRO) Xtuner E3+ (Xtuner E3 PRO)Released!!!! The update information as follows: 1. Modified many details of the interface, better user experience than before.   2. More United and vivid color, provide the better overall visual effect. 3. Improved the proportion of the home screen, make a generous and beautiful interface. 4. Added drop-down menu, users can quickly and easily enter the relevant function interface. 5. Optimized Wifi connection. 6. Fixed the bug in the multi-language display.   Xtuner E3  Supports 5 kinds OBDII protocols: ISO9141-2, ISO 14230, ISO 15765, SAE J1850-(PWM), SAE J1850-(VPW), [...]